Transport infant incubator SK-N211

on castersheight-adjustablewith monitor

Product application positioning： Hospitals, maternity centers, neonatology departments. Design： The product is designed to provide a treatment environment with clean air and appropriate temperature for low-severity infants, critically ill infants and premature infants. Infant incubator control system adopts computer technology to implement servo control of the temperature in the box (box temperature/skin temperature), according to the set temperature and measured temperature proportional heating control. The internal air uses the principle of heat convection to adjust, to create a suitable air, temperature and humidity, warm and comfortable, similar to the mother's womb good environment, so as to cultivate and care for the baby. TECHNICAL PARAMETERS: Mattress to thermostat height 450 mm Front side door panel 826×310 mm Mattress tray size 630×360 mm Crib tilt adjustment ±10° stepless Power supply A C 220V，50Hz Power requirement ≤400VA Temperature control mode A ir and skin servo control Air temperature control range 20.0°C-37.0°C Temperature overcontrol mode to 37.1°C-39.0°C Temperature control range 20.0°C-37.0°C Temperature overcontrol mode to 37.1°C-38.0°C TECHNICAL CONFIGURATION: Accuracy of temperature sensor ≤0.3°C Display range 5%-99% Temperature fluctuation ≤0.5°C Mattress temperature uniformity ≤0.8°C Rise time: ≤45 minutes Thermostat noise level ≤55dB Ambient temperature +20°C-+30°C Ambient relative humidity 30%-75% Ambient wind speed <0.3 m/s Crib maximum load 5KG Maximum load-bearing capacity of infusion stand 2KG Maximum load-bearing capacity of the hanging cabinet 6KG