Forensic autopsy table STV 10/850

for histopathology laboratoriesdissectionmortuary washing

The autopsy table is mounted onto a center support column and is height-adjustable from 750 to 1050 mm. The table is completely made of stainless steel (material no. 1.4301 – ANSI 304). Through a three-piece, removable, perforated work top, all unsanitary vapors are safely vacuumed downwards. The work surface is equipped with a high surrounding border, as well as a negative inclination to the waste sieve (detachable). A seamlessly welded basin, 400 x 500 x 200mm, with a surrounding Profile border, an overflow pipe as well as a sieve insert is installed to the end of the table. A bath with a negative inclination to the drainage channel is located under the perforated work surface. An integrated sprinkler system guarantees that the table is continuously sanitized. All power connections and the air duct, are built into the center support column and can be easily accessed at any time by means of an inspection opening . The table is to be connected to a ventilation system provided by the customer. features: Center support column with 2 inspection openings UP / DOWN button for height -djustment by means of an integrated electro mechanical drive Knee-operated mixing tap for cold and warm water 3 m shower hose with hand Sprinkler 2 splash proof electrical outlets Regulator valve for the integrated sprinkler system 3-piece work top with large waste basin/sieve insert Electrical and water connections are preinstalled The safety requirements for drinking water as per DIN 1988 part 4 and EN DIN 1717 are to be provided by the customer TECHNICAL DATA: Dimensions W/D/H: 2600 x 850 x 750 / 1050 mm Voltage:230 Volt / 1 Ph / 50 Hz Exhaust air capacity:min. 1000 m³/h