Laboratory fume hood 02-16.212

ventedpolypropylene

• a reliable powder coated metal frame guarantees high reliability of the construction; • light grey powder coated sheet metal; • a counterbalanced lifting sash made of Triplex Safety Glass can be fixed at any height required (50 - 650 mm); • one-piece fibreglass lining of working area resistant to corrosives and high temperatures; • a 250mm diameter flange for ducting system connection is installed in the upper section of the cabinet; • lighting with 2 fluorescent lamps is installed for illumination of the working place; • underbench unit with 2/3 sections, each with a door and is equipped with adjustable interior shelf; • 4 Schuko sockets (220V, with IP55); • circuit breaker 164 with a transparent protective window (IP55); • light and fan switch (optionally); • 1500mm-long electrical cable and Schuko plug; • polypropylene or Durcon drip-cup is installed as a standard at the right; • cold water tap with front panel FAR (Italy); • 1300mm-long flexible polypropylene pipe for waste water connection; • 800mm-long copper pipe for water supply connection; • 'Y' Type strainer; • 1/2 vented all-metal underbench cabinets for the storage of noncorrosive reagents; • left section of the underbench cabinet for the storage corrosives is vented and has a one-piece fiberglass lining; • concealed hinges placed out of the storage area; • installation of an air flow monitor. • installation of a rod latch lock; • installation of gas/water taps with copper pipework; • installation of an airflow controller; • installation of a sash electric actuator; • installation of a damper with electric actuator; • installation of an airflow variator for fan control.