Clean room modular ceiling LPS

PANEL CEILING - a sealed ceiling that can withstand a load of up to 150 kg / m , which allows technical personnel to move along the surface of the mounted ceiling when performing work in the technological space above the ceiling. Design: made on the basis of PROFI panels, which consist of external visible parts (metal, plasticized painted aluminum, with antibacterial PVC, stainless steel, HPL-plastic) and an internal part (mineral wool with a density of at least 120 kg/m3 and a frame made of aluminum profile around the perimeter of the panel). The panel ceiling is resistant to excess or negative pressure in the room (not less than ± 250Pa). LPS (PMTS) - economical and easy-to-install cassette ceiling Design: the original design of the carrier profile allows for quick and easy installation and dismantling of cassettes. The cassettes are made of galvanized steel 0.7-0.8 mm thick, powder coated RAL 9010. As an option, the cassettes can be painted with antibacterial paint. The supporting profile and suspension system are made of galvanized steel. The cassette ceiling is resistant to excess or negative pressure in the room (not less than ± 50Pa). LPG (PMTS-G) - sealed, quick-to-install cassette ceiling Design: a rubber seal is installed in a special groove along the perimeter of the cassette, which guarantees airtightness of the ceiling. The cassettes are made of 0.7-0.8 mm thick galvanized steel, powder coated RAL 9010. As an option, the cassettes can be painted with antibacterial paint. The supporting profile and suspension system are made of galvanized steel. The cassette ceiling is resistant to excess or negative pressure in the room (not less than ± 50Pa).