Clean room modular ceiling Line 55A

Our Line 55A load bearing aluminium grid system is ideal for use in the most critical GMP and DIN EN ISO 14644 areas, where a large number of filter fan units are essential. The narrow face width of the support profiles and their high load bearing capacity mean that the largest possible filter area is achieved with FFU full occupancy. The aluminium profiles are ideally suited to accommodate Teardrop lights. The system can be used as a maintenance level for technical trades, optionally with FDA-compliant silicone tube seal. GMP-compliant profiles only 55 mm wide walkable version available Dimensions Height (H) 80 mm Joint width 3 mm Dimensions of clean room Standard pitch 1.200 x 1.200 mm max. suspension distance 1.200 x 1.200 mm Visible width of grid profiles 55 mm Technical Details Serviceability from below, from above max. point load 150 kg Weight 20 kg/m² - 50 kg/m² Component list 1 ceiling panel: flush ceiling panel, made of galvanised steel; optionally in aluminium. All-round Z-edge. Powder-coated according to RAL or other common colour systems. Gloss level approx. 20E for RAL 9010. 2 bandraster profiles: Extruded aluminium. Surface powder-coated or anodised. 3 suspension unit Line 55A: for infinitely variable height adjustment of the entire system; Suspension from the bare ceiling or from a steel structure. 4 cross connector: for bolting together main and cross band louvres (galvanised steel). 5 clamping spring: for holding down (spring steel) the ceiling panels on the supporting grid. 6 walk-on plate (optional): for creating a walkable overall system.