Clean room modular ceiling Line 100S Type 3

The non-load bearing Line 100S Type 3 light steel grid system can be implemented as a cross grid as well as a linear grid. Complete clean room compliance is achieved by sealing the ceiling joints, even in GMP areas with increased requirements. The simple structure of the clean room ceiling enables fast and efficient installation. Safety-relevant components – such as smoke detectors and sprinklers – can be installed in the support grid, which means that the ceiling panels are fully accessible for inspection. GMP-compliant design 100 mm profile width execution as linear post cap ceiling possible easily and fast to install efficient solution Product Information Dimensions Height (H) 30 mm Joint width 3 mm Dimensions of clean room Standard pitch 1.200 x 1.200 mm, 1,200 x 600 mm max. suspension distance 1.200 x 1.200 mm Visible width of grid profiles 100 mm Technical Details Serviceability from below Weight 10 kg/m² Component list 1 ceiling panel: Flush ceiling panel, made of galvanised steel. Optionally in stainless steel. Z-edge (flush with surface). Powder-coated according to RAL or other common colour systems, stainless steel polished or brushed. Gloss level approx. 20E for RAL 9010. 2 suspension unit Line 100S Type 3: Consisting of Nonius hanger base, Nonius safety cotter and Nonius upper suspension part. 3 bandraster profiles: Height 30 mm, width 100 mm. Installation of sprinklers or smoke detectors is possible in the bandraster profiles. 4 cross-connection screw: Required to make a quick standard cross-connection.