Pared Pulse with PowerMAG ppTMS ALL-IN-ONE Solution
In general ppTMS protocols usually require two stimulators connected to one coil. The PowerMAG ppTMS is a stand-alone rTMS device to allow various ppTMS protocols and rTMS protocols including Theta-burst protocols within one machine by using actively recharging between conditioning (S1) and test pulse (S2)
Features
No second device or „option“ needed thanks to MAG & More´s ppTMS technology
Powerful rTMS, TBS and ppTMS with bi-phasic pulses in one device
Pulse pairs (ISI as low as 1 ms)
In 0,1 ms steps adjustable pulse pairs (ISI)
Adjustable intensity of conditioning (S1) and test pulse (S2)
online-EEG feasible
Maximal frequency - 100 Hz
Minimal frequency - 0.1 Hz
Minimal ISI - 1 ms
ISI minimal change value - 0.1 ms
Frequency minimal change value - 0.1 Hz
Maximal frequency at 100% intensity - 30 Hz
Maximal Intensity - 100 % (30 Hz), 70 % from 15 Hz to 100 Hz with PowerUNIT
Stimulation parameters
Magnetic induction - up to 4 tesla (depending on coil)
Maximum pulse power - 160 Joule
Pulse shapes - Full sine-wave
Current direction in the coil - Invertible on the equipment
Rise time of the stimulation pulse - 40 μs (PA)
Pulse duration - 160 μs
Input/Output interface
Trigger input - BNC-connector (TTL pulse, active high)
Trigger output - BNC-connector (TTL pulse, active high)
External interface - 8 pole DIN connector (Single pulse, repetitive mode, TBS, ramp, custom stimulation protocols possible)
Synchronisation - BNC-connector
”Made in Germany“ quality
Number of discharges at 100% intensity - 2000000
Electrical safety - Protection class 1, Type BF
Hardware classification to MDD 93/42/EEC - class IIa