Modular shelving unit MS210684510

for container storage

MMSlog® MODULAR SHELVING WITH STANDARD DIMENSIONS IN COMPLIANCE WITH ISO3394/HTM71 • The structure is made of three tubular elements or folded epoxy coated steel sheet • Side frames (a). • Upper/ lower connectors for side frames (b). • Back diagonal tensioner to stabilize & strengthen the structure (c). • Modular shelving rack with standard dimensions according to ISO 3394. • Strong design, load-resistant, minimalistic & functional. • Frame made from 30*30*2 mm tubes and connectors/ tensioners from 3 mm-thick folded steel sheet. • Light-grey Epoxy coated steel sheet. • Frames fitted with holes to install the guide-rails every 75 mm. • 2 adjustable leveling legs on the lower part of the frames (with a single wrench). • The connector & stabilizer set allow the union of frames and give strength to the whole strucuture. • Side frames equiped with 10 pairs of ABS guide rails to allow trays/ baskets gliding (d). • No tool required to clip the terminals “L” & “R” to the guide rails. • On the central & lower levels, the guides are in straight horizontal position, while they can be set in diagonal on the upper levels for easier access to products. Modular shelving rack to store disposable material using the 600 x 400 mm Kanban management system, in compliance with the ISO 3394 standard (HTM71) Each section has 1 or 2 monobloc structural frames. The frames are made from steel tubes, of 30x30x20 mm, light-grey epoxy coated on the outside. The lower ends of the frames are provided with adjustable legs to level the height using a single wrench. The frames are joined together by a set of 2 connectors and a stabilizer, easy & quick to install