Fluorescence immunoassay POC analyzer FiCA I

for infectious diseaseslaboratory

The designated purpose of this instrument is strictly for in vitro diagnostic use. It is intended for proficient laboratory settings within medical institutions, such as central laboratories, emergency departments, clinical units, and health assessment centers. TEST PRINCIPLE Medlere Fluorescence Immuno-analyzer uses an LED as the excitation light source. The emitted light from the fluorescence microspheres is collected and converted into an electrical signal. The signals are closely related to the amount of fluorescence dye molecules present on the spot under examination. After a sample is applied to the test cartridge, and the concentration of the analyte is calculated by a pre-programmed calibration process. Medlere Fluorescence Immuno-analyzer can only accept test cartridge that are provided by Medlere Limited. TECHNICAL PARAMETERS Parameters Size 240mm*214mm*120mm Weight 1.5 kg±300mg Power Conditions DC12V, 5A Repeatability CV＜ 1% Stability CV＜ 1% Operating Environment Temperature 5~40℃ Relative Humidity 10~80% Atmospheric Pressure 860~1060hPa Operating Altitude＜3000m Location Dry, clean, flat, horizontal surface, with the front surface at least 10 cm inside of the table edge, away from direct sunlight, mechanical vibration, and strong electromagnetic interferences. Storage Conditions Temperature -10℃~50℃ Humidity ＜85%