Microbial air sampler MAS-100 CG Ex®

Our MAS-100 CG Ex® system is for use when there is a need to test compressed gases for microbial contamination. In fact, it is the only compressed gas microbial air sampler approved for use in Zone 2 explosion hazard areas. Using its two sensors, one to measure mass flow and the other for pressure, the unit collects samples under the pressure of the gas supply. The unique MAS-100 CG Ex® system makes compressed gas sampling safe, easy and accurate. Collects samples under gas pressure; after sampling, gradual decompression occurs, avoiding possible damage to microorganisms Sampling at two different flow rates: usable for low flow applications The only compressed gas microbial air sampler approved for use in Zone 2 explosion hazard areas Factory calibration only: reduces the risk of errors Unique flow sensor technology: no manual adjustment needed for different gas types after selection of the gas Automated collection process: saves you time Pre-programmed for a range of different gases: no further calculations needed Can store up to 10 gas protocols Height - 32.5 cm Length - 37.0 cm Width - 11.0 cm Weight (without Sampling Head) - 10 kg Material Box - Coated aluminum Nominal Flow Rates - 100 liter/min. ±5.0% (over the pressure range) of 1.5 bar to 10 bar (absolute) 50 liter/min. ±5.0% over the pressure range of 1.5 bar to10 bar (absolute) Standard Sampling Volumes - 50, 100, 250, 500, 1000 liter Freely definable sampling volumes - 1 to 2000 liter, volumes individually selectable between 0 and 2000 liters. 0 volumes are not displayed Pre-programmed gas types - Air, nitrogen, carbon dioxide, argon Battery Pack - 20 cells NiMH, 3800mAh, voltage 24 V