Dental handpiece ENDOIT

electricdirectpush-button

With various functions like reciprocating, auto stop and auto reverse. It helps users do more précisé and safe treatment. Torque range : 0.5 ~ 4.0 N.cm It can be adjusted from 0.5 Ncm to maximum 4.0 N.cm and can be set in 0.5 N.cm units. 5 Operation Modes Forward, Reverse, Auto Reverse Stop, Auto Reverse Run, Reciprocating 8 Memory Programs Selecting each number brings up the stored torque, rotation speed, and rotation mode settings. You can save new settings in memory. Continuous use Available for 3 hours and 30 minutes with 1 hour and 30 minutes of full charge (※ Based on continuous no-load operation) Forward Mode The motor rotates in forward direction and stops when the set torque value is reached. Reverse Mode The motor rotates in reverse direction, it does not stop even when the set torque value is reached. Reciprocating mode The motor reciprocates in the forward and reverse directions. Rotate in the normal forward 150˚ / reverse 30˚the rotation value changes flexibly according to the load value. Auto Reverse Stop mode Set while the motor rotates in the forward direction reverse when the torque value is reached rotate If the load is lower than the set torque value the motor stops. Auto Reverse Run mode Set while the motor rotates in the forward direction Reverse when the torque value is reached rotate If the load is lower than the set torque value the motor will rotate in the forward direction again.