Flow rate analyzer Expert M3L XRF

pressurecarbonCO

Expert M3L is designed for use in stationary and mobile laboratories. To increase the sensitivity for light elements (Na, Mg, Al, Si) analyzer is equipped with a helium purge channel system (flow rate of 30-45 ml/min at a pressure of 0.5-1 atm). The analyzer has spacious measurement chamber with an interior lighting for the analysis of large size samples. Built-in thermal printer provides immediate printout of the measurement data. Enhanced dust protection is enabled through built-in ventilation system with filter elements. M3L Features compositional analysis of every metal component fast and reliable identification of all alloys grades evaluation of carbon content in steel and cast iron analysis of special alloys including Ti, Mg, Ni/Co, etc measure coating and underlayer elemental composition measure precious gold, silver and other precious metal contents of alloys M3L Metrological Characteristics determination of elements from magnesium 12Mg to uranium 92U (optional 11Na) simultaneously in a single measurement the range of the measured element contents - 0.005-100% detection limits of elements - 1 ppm measurement time - less 1 min. (typically 10 - 30 s.) Technical Specification Continuous opration time - unlimited Time on internai Systems of autonomous power supply - at least 6 hours Power supply - AC, 50/60 Hz - 100-240 V Power consumption measurement unit - <50 W Operating temperature range - +10C to +45C Relative humidity within operating température range - <90% Dimensions of measuring chamber - 300x150x240 mm Maximum weight of the measured sample - 20 kg Dimensions of measurement unit - 412x312x312 mm Weight of measurement unit - <16 kg