Sample injector

The sample injector is a fast switching solenoid valve that worked by switching two positions back and forth and was configured with sample loops between two of the ports to create a specific volume column to meet final dispensing requirements, so the accuracy of tubing inner diameter is very important to ensure the accurate sample dispensing volume. Runze is a professional switching valve manufacturer and supplier, we are able to offer various fluid control equipment. If you want to know more, please contact us now! Orifice 1.2mm Wetted material PCTFE, Sapphire Port configuration 6/8/10 port Port-to-Port volume 27.5μL Dead volume 5.4μL Air pressure 0-1.0Mpa Water pressure 0-1.6Mpa Origin detection Auto reset to initial position when powered on (optional and settable) Liquid temperature 0-150℃ Connection 1/4-28UNF Replaceable parts Stator replaceable, sealed rotor irreplaceable Transposition Random start to any specific port Driver Non-optional Valve drive ≤500ms Max. torque 3N/m Communication RS232, RS485, CAN Baud rate RS232/RS485: 9600bps, 9200dps, 38400dps, 57600dps, 115200dps CAN: 100Kbps, 200Kbps, 500Kbps, 1Mbps Address & Parameter setup Communication interface Power supply DC24V/2.0A Max power 36W Operating temperature -10℃ to +50℃ Operating humidity <80% relative humidity, non-condensing Dimension (L*W*H) 60*51*145.8mm Net weight 0.73KG