Clavicle compression plate CBTDL2D

laterallockingmetallic

Implants of the Alians Clavicle range are dedicated to the fixation of fractures, mal-unions, non-unions, and osteotomies of the clavicle in adults. TECHNICAL FEATURES Polyaxial locking fixation (DualTec System ® III) Precontoured and bendable implants Comprehensive range of superior plates Pre-angled screws allowing a 20° polyaxial angulation ANGULAR RANGE : +/- 10° POLYAXIAL LOCKING FIXATION FOR LATERAL PLATES The DTS3 technology ensures the locking of the screw into the plate while allowing its angulation. The DTS3 polyaxial locking holes are located in the epiphyseal area. This system helps for the insertion of the screws in diverging or converging directions and strengthens the assembly. OPTIMIZED ANATOMICAL CONGRUENCE The design of this implant is the result of a proprietary state-of-the-art mapping technology to establish an optimized congruence between the plate and the bone. BENDABLE PLATES Some plates from ALIANS CLAVICLE S range offer bending areas. It is possible to bend the plate with the bending irons (ANC452) following the instructions below: > Bending is only possible in the areas intended for this purpose, > A bendable area should be bent only once and in one direction, > Bending should not be performed excessively, > The holes must be protected so as to avoid damaging of the fixation. There is a risk of distortion of the holes when bending the plate.