Dental laboratory composite warmer

dental

1. After plug the power supply, the digital tube is always on — C 2. After plug the power supply, single press ON/OFF/SET a.Heater goes into the heating state according to the set temperatue at previous power-off b.It automatically stops heating after reaching preset temperatue. 3. After plug the power supply, single press + or – into the setup mode.Press + can increase the preset temperatue.Press can decrease the preset temperatue.After setting, single press ON/OFF/SET into the heating state.It automatically stops heating after reaching preset temperatue. Notice: In the setting mode, long press the + or – to quickly increase or decrease the preset temperatue, any integer within the preset temperatue 40-70 can be selected. The highest degree of heating temperature: 70 ° C Minimum degree of low temperature heat: 30 ° C Temperature Setting: Press the SET button for one second, the display starts to flash, then press the up and down buttons to set the temperature you want, next press the SET button again. The display number stops flashing and the machine starts to heat. Power supply: 100~240V-50/60Hz Input power: 11W,Hot temperature range: 30-70°C LED Display: The screen shows the current temperature in real time, so that the operator knows the heating progress. 5 EASY RESIN HEATING HOLES Composite warmer operates over the temperature range of 30-70℃ for the heating of dental composite. Easy handling. Composite warmer makes sure the unified warming of composite and offers a flawless composite restoration. 1 WARM KEEP HOLE Suitable for most material, the big hole is 70mm, the smaller hole is 60mm.