Hospital bed mattress elatex® Cell

evacuationnylonfoam

Non energetic air chamber system The elatex®-cell system consists of a fixed PUR frame with 9 self-adjusting air cells. The cells filled with PUR foam are connected to each other by a hose system. This technology, in combination with the highest quality materials and three special valves, enables excellent self-stabilising adaptation to the individual body shape and thus very low contact pressures. The heel and head area are constructed with a special cold foam in RG 70. Due to the cross-section sloping towards the end of the bed, lower pressure values are achieved. The frame provides stable support when sitting on the bed due to a higher compression hardness. A 5 cm cover plate made of high-quality viscose foam ensures high resting comfort. The cover complies with the novacare® standards and thus has a tear-resistant base, which is additionally equipped with transport and evacuation straps. These enable the mattress to be transferred even when the patient is lying on the bed. Mattress incl. protective cover with zip, blue Measurements: approx. 200 x 90 x 18 cm Weight: approx. 15 kg Material Mattress Frame: RG 40 PU foam Heel-zone: RG 70 cold foam Topper: RG 70 cold foam Edition: RG 50 Visko Cells: Nylon/PU polyethylene foam filling Material Cover Ground: Nylon 600D with evacuation loops Top side: Polyester with welded seams washable at 95° C, do not iron, can be tumble dried at a low temperature