Laboratory bench with shelves NTS

It is manufactured from 4x4x1,2 cm profile pipe. It is in the form of Horizontal and Vertical Feet. In demoulded models, parts are assembled on site. Underneath the vertical feet, pingo feet are fitted which can accomodate anywhere. Taps are placed in the pipe gauge at the pipe ends. At the end of the carrier carcass bench; 1.20 mm DKP demounting end panels shall be assembled as small and large. The seating spaces in the benches are demounted in accordance with the frame. At the rear part of the supporting carcass, the installation space is within the range of 15 – 20 cm. Perforge 1.20 DKP horizontally, up to the size of the bench (disassembled at each interconnection size), all installations to be installed and applied, on the tray, in accordance with the installation characteristics to be applied in the installation space. The carrier is mounted in the system as a disassembly in the back legs. The energy band is mounted on the part of the carcass above the counter. Carcassette can be used on both sides of 30 cm single shelf system, applied 30x5x (optional). Shelves are demounted from the DKP steel material to the system. Carrier frame made from composite MDFLAM. Customized production.