Laboratory thermostat OvanTherm H

immersiondigitalheating

Temperature controlled by microprocessor, by means of an integrated Pt100 sensor, with “ARA V2” algorithm of temperature regulation with “fuzzy logic” control. Digital Display LCD backlighted showing the selected and actual temperature. Membrane push-button control. Pump for homogenization (6L/min) (max. pressure 200mbar). Thermostatization at maximum temperature of maximum 20L. Double safety thermostat: cut out indicator lamp. The unit will cut out if there is insufficient liquid or if the temperature exceeds the maximum temperature. safety automatic disconnection with acoustic alarm that prevents overheating from the programmed temperature (+2,5ºC). Connects again when the Tª is below the limit. Indication on the display of high temperature on the tank, that provides protection against burn. From 45ºC. Automatic restart after unexpected shut down keeping the same parameters as before the incident. An incident sign appears on the display Memory of the last settings. Attachable to the tank through a clamp and finger screw. Minimum high of the tank: 14cm. Mains switch ON/OFF protected against splashes. Water drainage faucet and handles for an easy transport.