Self-tapping implant screw FYxoss®

stainless steelscrew

Thanks to the innovative FYxoss® selftap system, the screws can be threaded without predrilling into Class II-IV bone according to Adell. For Class I bone, suitable drills are included in the set. With the specially developed stop, excellent directional control and overall stability can be achieved even in challenging situations. The special tip design guarantees reduced axial forces vs. conventional self-tapping systems. The entire system in a nutshell Handdriver Stainless steel screwdriver with medical grade plastic polymer handle, sterilizable in class B steam autoclave up to 135°C. Axial motor drill Drill: Ø 1.35 suitable for very deep drilling maximum drilling depth: 14 mm Drill diameter: Ø 1.0 mm Drill: Ø 1.35 suitable for very deep holes Maximum drilling depth: 14 mm Drill diameter: Ø 1.0 mm Insertion bit Square key: 0.8 mm The diamond and graphite coating guarantees better abrasion and oxidation resistance (short/long) Stop for insertion bit Connection system with screw head Ø 3.0 mm Material: Ti Gr5 FYxoss® selftap can be used for: Yxoss CBR® fixation The FYxoss® selftap screws with lengths of 5, 7, and 10 mm are perfectly suited for the fixation of Yxoss CBR®. This is due to the ultra-flat, tissue-friendly screw head as well as the precisely fitting diameter of 1.35 mm. Shell technique For the Shell technique, we recommend the lengths 10, 13, and 15 mm. The sharp tip and the three prismatic cutting edges enable self-tapping through the bone shell and the autologous bone. Bone block fixation The trapezoidal thread of the screws enables a solid hold of the bone block on the original bone. For this technique, we recommend the lengths 10, 13, and 15 mm.