Medical gas manifold MOD

for laboratoriessupply

MOD is a supply board to use in combination with a switchover board for the regulation of the emergency source during maintenance on the principal source. This avoids installing extensions and reduces the amount of leaking points. It is particularly suitable for the high flow supply of industrial gases, except toxic and corrosive gases. Key advantages Outstanding pressure consistency with Balanced Valve Technology Ready to install for better productivity: all components are pre-mounted on the mounting panel Non-whipping filter improves safety of the operator during the cylinder replacement Can be equipped with an outlet ¼ turn shut-off valve (Multi-turn valve with 30 bar or 50 bar version for oxygen use) Can be connected to an alarm box using contact gauges Acetylene and propane versions available on demand Specifications Female ports In: G 3/8 - Out: G 1/2 In: 3/8 NPT - Out: G 1 Seat seal PCTFE O-ring EPDM - Standard FPM Diaphragm (regulator) AISI 304 or Hastelloy® Weight ± 6,0 kg Leak rate w/outlet valve: 1.10-4 mbar ℓ/s He w/o outlet valve: 1.10-8 mbar ℓ/s He Temperature range -20 to +60 °c Gauges High and low pressure (M10 x 1 or G 1/4) Inlet pressure 200 bar / 300 bar, AD and PR4: 25 bar Outlet Pressure 10/16/30/50 bar, AD: 1 bar, PR4: 4 bar Nominal flow 200 bar version 70/110/150/180 Nm3 /h (N2) Nominal flow 300 bar version 50/70/100/130 Nm3 /h (N2) Nominal flow ad and pr4 AD: 6,5 Nm3 /h PR4: 10 Nm3 /h Oxygen use OK with inlet pressure 200 and 300 bar