X-ray QA dosimeter RTI LoniMover™

The easiest way to measure CTDI and waveforms for Wide Beam and Cone Beam CT. You can move a detector through any beam no wider than 300 mm, which makes it ideal to measure on Cone Beam CTs. Following the IEC standard IEC 60601-2-44 Ed. 3:A1, the Pencil Ion Chamber can accurately and reproducibly measure the full CTDI for Cone Beams and, with the CT Dose Profiler, you will get the FWHM, Geometric Efficiency, and full CTDI with only one measurement through the beam. Sweep or Step mode In combination with the RTI CT Dose Profiler, the RTI LoniMover™ can push the detector through an X-ray field with a selected speed to measure the full dose profile and all interesting parameters, like FWHM and full CTDI. The LoniMover™ can also use Step mode. This involves moving a Pencil Ion Chamber through the beam in exact steps, according to standard IEC 60601-2-44 Ed. 3:A1, to get accurate measurements and cover up to 400 mm. Connect with Bluetooth® or cable, and it also has its own trigging device to start the movement, measurement, and CT at the same time for smooth capturing of the results! Software The RTI LoniMover™ comes with LoniCT software to handle the operation. The LoniCT software works stand-alone with an RTI Cobia FLEX or Cobia SENSE to record measured data as well. LoniCT software also operates simultaneously with the RTI Ocean software so you can gather all your measured data in your sessions, as well as analyze, save, and autogenerate full reports. With this solution, you can use the LoniMover™ with a Piranha and other tools from RTI. Art. No: 9730030-00 OFFER! Find out more at https://rtigroup.com/lonimover-campaign-offer/. Valid until 31 December 2022.