Floors ans surface cleansing wipes kodan® (N)

Alcohol-based, rapid disinfection of surfaces*. Our Plus broad efficacy within very short time residue-free ready to use The product is suitable for disinfecting surfaces. Thoroughly wipe the surface with the cloth and allow the active ingredient solution taking effect. Ensure complete wetting and maintain the surface moist during the entire exposure time. Ensure that all visible dirt is removed before disinfection. Treat only small areas. The wiping area depends on the room temperature and the structure of the surfaces to be disinfected. Pay attention to hygienic aspects when opening and threading the first cloth. Make sure to close the lid after use. Refilling the box Disinfect your hands first and put on a fresh pair of protective gloves and a gown. Ensure that the gloves are not contaminated by other activities during the filling process. Transfer the sticker with the expiry date to the dispenser box. Unscrew the lid, place the refill bag completely in the dispenser box (if necessary, shape it to fit beforehand) and cut off the edge of the bag. Pull the pre-plucked cloth from the middle of the roll, thread it from below into the guide slot provided in the cover and pull it through. Disinfect the lid and screw it on. For high-risk areas, schülke recommends not using refill bags. For professional use only. Composition: 100 g solution contain the following active ingredients: 25 g Ethanol (94%w/w), 35 g Propan-1-ol Labelling according to Regulation (EC) No. 648/2004: perfumes