Laboratory vial washer EVW-100

spraycompressed airlinear

- Can be used as a stand-alone unit with an infeed and outfeed turntable or integrated into a filling line - No alignments of spray nozzles - No format parts required for 13 and 20mm caps - Fresh Water Rinsing, Compressed Air Drying - Equipped as standard with an Allen Bradley CompactLogix PLC and an Allen Bradley PanelView 600 Plus Human Machine Interface (HMI) - Siemens is available as an option - Menu-driven operation through the human machine interface (HMI) - To avoid unauthorized access to machine functions password levels are implemented - PLC-controlled servo motors automatically set the output rate, the vial height and the water/air flow per vial size - All electrical components are installed in the electrical cabinet located in the base of the machine - Piping system and electrical cabinet are installed inside the frame of the machine, resulting in a small footprint and a clean installation - A vial-dedicated timing screw over the length of the machine captivates and transports the vial through the machine - The vials ride on a narrow rail and rotate continuously during their travel in the machine - Enclosing the aluminum cap between two opposed belts creates a seal that prevents the cleaning agent from entering the cap area and allows pressurized water for cleaning the entire vial body, including the bottom - The machine is separated into the rinsing section and the drying section - Rinsing is accomplished by low pressure water nozzles, cleaning the vials from the neck down (while they rotate) - Drying can be accomplished by either compressed facility air or by an on-board air blower in the base of the machine - Vials leave the machine dry