Panic button nurse call system Aspire SmartSync®

for healthcare facilities

The Aspire SmartSync® Patient Fob allows the user to wear the device and raise a call whilst on the move. The unit has been designed for use within open spaces such as day rooms and outpatient areas. When a call is raised using the call button, the red reassurance LED will flash. A call from a SmartSync® patient fob will activate the following nurse call equipment: LED Indicator and Tone Units (illuminate and sound) Aspire SmartSync® Touch Indicator (display the call and tone) Over Door Units (illuminate) The call is reset from the patient fob by pressing the grey reset button. This will extinguish the reassurance LED and reset the call system wide. Facilities and Features Facilities: Illuminated LED (red) Normally Open orange call button Normally Open grey reset button Features: Easy pairing procedure Low power consumption using standard CR2450 batteries. ‘Push-to-pair’ connectivity for quick set-up without the need for commissioning software ‘Low Battery’ indication Registering a patient fob to a system 1. Press the ‘Menu’ icon and enter the password on the Aspire SmartSync® Touch Indicator. Please use either: 080769 or 895551. Press the ‘Aspire’ icon. 2. Ensure the battery is inserted in the patient fob. Press ‘Add Endpoint’ in the Aspire menu on the Aspire SmartSync® Touch Indicator. 3. Press and hold the ‘Reset’ and ‘Call’ button on the patient fob until the reassurance LED goes ‘green’. This will register the patient fob on the system. Press ‘Accept’ on the Aspire SmartSync® Touch Indicator. 4. The patient fob is now registered to the system. The patient fob can now be learnt to an Over Door Unit or LED Indicator and Tone Unit