FFP2 mask Dr.Albert®

polypropylenefiberglass-freevalveless

The fastening system consists of a metal band adjustable to the shape of the nose and elastic bands/cords. The mask acts as a barrier for particles and viruses in the inspired air (filters the particles) Wash your hands with water and soap before touching the product. Open the mask by pulling on the elastic bands and ensure that the metallic element is on the upper side of the mask. Place the mask on your chin and then pull it over your nose, so that your mouth and nose should be completely covered. Place the elastic bands behind your ears. Use both hands to secure the mask: using your fingers, press the middle of the fastening strip in the nose area, then keep pressing towards the ends of the metallic strip. Check for tightness: cover the protective mask with both palms, in such a way as not to disturb the placement of the mask on your face, then exhale suddenly, checking if the air escapes in the nose area. If you feel the air escaping by the fastening metallic strip, check that it is well pressed against your face. The mask should be changed every 4 hours or whenever it has become moist or damaged. The use of the mask in low-oxygen environments or during sleep is not recommended. People suffering from asthma or other respiratory disorders should exercise caution when using the mask. To ensure your safety, please consider the following steps prior to using the mask: 1. The mask is not damaged or contaminated. 2. The elastic bands are not damaged and are elastic. 3. The metallic strip is not damaged or loose.