Medical support arm AM-TRACK-LP24

wall-mountedsecure

AccessMount™ wall mount track provides a versatile solution to install IT and clinical equipment on wall surfaces at an ideal height. Choose from low- or high-profile in three different lengths. 1 support extrusion 2 tapped strips (1 in each front t-slot; hole spacing 64mm vertically and 32mm horizontally) 2 caps (top and bottom) Cover strips Mounting hardware Accommodates all AccessMount™ arms. Wall arms easily slide in extrusion tracks and secure with minimal tooling. Extrusions install directly on the wall. Two T-slots with thread plates (grid 32mm) on the front of the profile can accommodate the system. High-profile accommodates electrical components, such as socket strips. Smooth surface molding is easily wiped clean. Small gaps help prevent germ formation. Cable routing for any cables supplying power to units. Load capacity: Up to 125kgs (275lbs), depending on the chosen wall mount. Material construction: aluminum, natural anodized. Low and high profile options to accommodate cable management. Each profile has 3 sizes to choose from: Low profile - 20.5mm thick: 640mm (2ft) w/ up to 50kgs (110lbs) load rating 960mm (3ft) w/ up to 75kgs (165lbs) load rating 1280mm (4ft) w/ up to 75kgs (165lbs) load rating High profile - 64mm thick: 640mm (2ft) w/ up to 50kgs (110lbs) load rating 960mm (3ft) w/ up to 100kgs (220lbs) load rating 1280mm (4ft) w/ up to 125kgs (275lbs) load rating Low profile: 2 tapped strips, 2 caps (top and bottom), cover strips (depending on length) including mounting hardware. High profile: 1 support extrusion with 2 tapped strips, mounting grid, 32mm in both front T-slots, 2 caps (top and bottom), including mounting hardware.