Forced convection laboratory incubator KB 9182

floor-standingstainless steel1-door

Housing galvanised steel sheet, epoxy-resin-coated, RAL. 7035. Unit on four castors, lockable. Interior space Made of high grade stainless steel. Cleaning friendly by rounded corners, slippery surface in the interior, meets highest hygiene requirements The thermo-jacket circulation system ensures even temperature and humidity distribution in the chamber and prevents drying of the samples. The air flow is outside the work space. The circulation fan stops about 40 seconds after opening the door, though who the internal temperature is near the outside temperature. Simply removing the inner casing for intensive cleaning. Door Double-walled insulation door, hinged on the right-hand side. Magnetic, all-round sealing strip, resistant to laboratory cleaning agents. Optional: with door lock Inspection window in the front door, triple glazed with cover Dim: W: 32 cm, H: 77 cm – see photo Interior fittings Standard: 3 pcs. perforated stainless steel shelves (max. 14 pcs.) Max. load per shelf: 20 kg in case of constant distribution – total load: 120 kg Shelf dimension: W = 500 mm, D = 450 mm Control and instrument panel, located above the door incl. temperature controller with digital indication Microprocessor-controller with digital LCD-display. Entry of temperature and time with membrane keypad, readable on LCD-display.With serial interface RS 232C. Time values can be given in minutes from 1 to 999. The set time corresponds to the actual operating time. Therefore, the heating time does not need to be estimated and added. Temperature accuracy: temporal: +/-0.2°C, spatial: +/-0.3°C