Based on QAC
Effective cleaning and disinfection
Free of aldehyde -and phenol- components
High surface compatibility
Due to corrosion inhibitor agents, suitable for everyday use
No specific requirement for rinsing
Concentrated
KONIX AF YD-1 is a concentrated floor and surface disinfectant suitable for all surfaces and materials.
AREA OF USE
Konix AF YD-1 is used for disinfection of surfaces in hospitals, especially PVC and epoxy areas, floors, walls, operating rooms of intensive care rooms and all other areas and hospital fixtures.
USAGE INSTRUCTIONS
Konix AF YD-1 is used with scrubbing-wiping disinfection (eg two bucket method or similar
processes), with the help of a cloth in the wiping method, with the help of cleaning machines. It is applied by mop for disinfection and cleaning of floors, and by wiping on other surfaces. Add water and then Konix AF YD-1 into the bucket. (40 ml Konix AF YD-1 for every 1 liter of water) Wipe the entire surface. Wait for 5 minutes. Do not use before the surface dries again. After the Konix AF YD-1 solution is prepared, it is used only once. The solution must be replaced each time.