Compact laboratory cooler MINITOWER

for rotary evaporatorswater-cooled

This picture shows a water-cooled version of a cooling unit. Thanks to its relatively small dimensions it can be easily positioned inside a laboratory cabinet or similarly confined space. Since the unit releases very little heat into the surrounding area, there is no need for ventilation of the installation location. The unit’s performance is sufficient to supply up to three workstations with rotary evaporators. A powerful magnetic coupled feed pump ensures good flow through the heat exchanger. A static maximum pressure up to 3.5 bar is available. All versions of the cooling unit are low-noise. The coolant tank is located on the front of the unit, making it easy to top up after the unit has been installed. The filler cap is an easy to open screw top. The water connections are located on top of the unit at the rear. All error messages are shown on the display and are indicated by means of an acoustic alarm. A yellow symbol indicates if the coolant level in the reservoir tank is too low. The water supply for the cooling unit can be provided by the building’s own water-cooling circuit or by the drinking water supply pipe. The unit consumes only as much water as it needs to meet the cooling output. When the cooling unit is switched off, water consumption is reduced to zero. The unit functions automatically and maintenance-free. Thanks to a special system, two side panels can be removed very quickly, making everything easily accessible and very service friendly. Application examples Rotary evaporators Destillation devices Soxhlet extractions Water baths General cooling applications at lower temperatures