Electric stimulator ECS305A

hand-heldTENSNMES

Dual Channel TENS and NMES device with remote switch Dual channel TENS and NMES device with remote switch controlled programames. 10 Preset TENS programmes, 10 Preset Neuromuscular Stimulation programmes. The wired remote switch control of mA by the patient ( to speed up the neuro-muscular re-education) facilitates a range of rehabilitation protocols. 2 Customisable TENS and 1 Customizable remote STIM programme. Lock mode function for measuring and recording home compliance (mA and total time used). Clear bright backlight LCD allows the display to be read more easily in low light or dark conditions. Keypad with bigger buttons for ease of use. Compact, light and reliable TENS and STIM; Dual channel: individually isolated circuits. Amplitude: 0-90 mA into 500 Ohm load ; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA. Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts. Waveform: Asymmetrical, rectangular bi-phasic with zero DC current. Selectable pulse width: 50 ìS – 450 μS [2% accuracy]. Pulse Rate selection: in the continuous mode 2 – 200 Hz [2% accuracy]. Mode: Continuous, Burst or Modulated. Burst mode: Bursts of 9 pulses [200 μS] at 150 Hz or 185 Hz, over 2 seconds. Modulation mode: 6-second cycle of concurrent width modulation and pulse repetition rate modulation. TENS 7: Width starting at50 ìS and increasing exponentially to 250μS in three seconds and then returning back to 50 ìS in the next three seconds.