Wax dental material EC4CW4010

for dental restorationstransparent

VITA CAD-Waxx is a residue-free acrylic polymer that can be fired and used for the computer-aided production of wax-ups in the press and casting technique. It is used as an aid for the digital wax-up technique. Features/Benefits Direct Restorations can be tried in the mouth. Efficient Impressive wall and connector thicknesses can be defined for VMK substructures, which is why very little post-processing is required. Flexible Ground moulds can be combined with casting wax or the prefabricated parts known from casting procedures. Recommended indications* for the fabrication of pressed/cast objects and drilling templates *) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective instructions for use of the products. VITA offers VITA CAD-Waxx with specific holder systems for the CAD/CAM systems: CEREC/inLab (Dentsply Sirona) VITA CAD-Waxx – UNIVERSAL SOLUTIONS* VITA offers VITA CAD-Waxx in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM system: inLab MC X5 (Dentsply Sirona) Note: VITA CAD-Waxx DISCs can be processed with all open CAD/CAM systems, which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove). *) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.