Fingertip pulse oximeter PO111

medicalfor hospitalhome care

1. OLED display 2. Low power signal 3. SpO2、PR、PR bar chart display, easy to track SpO2、PR change 4. Accurate and reliable - Accurately confirm SpO2, pulse rate and pulse strength 5. PI: Perfusion Index 6. Rotatable Multidirectional Display 7. 8 seconds automatic shutdown after finger out, energy saving 8. Built-in soft and comfortable silicone finger mold, no pressing fingertips, more accurate measurement Specifications : 1. Display type:OLED display 2. SpO2 Accuracy :±2% on the stage of 70%～99%,Unspecified(≤70%) Resolution: ±1% 3. PR Measurement range :30BPM～240BPM Accuracy:±1BPM or ±1% 4. Power supply: two AAA 1.5V alkaline batteries 5. Power consumption: below 30mAh 6. Automatically power-off :The product automatically shuts off when no signal can be detected within 8 seconds. 7. Operation environment:Operation temperature : ＋5℃～40℃ Storage temperature: -10℃～40℃ Operation humidity :15%～80% Storage humidity : 10%～80% Air pressure:70kPa～106kPa 8. Declaration: EMC of this product comply with IEC60601-1-2 standard. 9. Measurement performance in low perfusion condition: required test equipment(BIO-TEK INDEX Pulse Oximeter Tester)could measure the available pulse waveform with the amplitude of 6% of the simulation pulse wave amplitude. 10.Interference resistance capacity against ambient light :device works normally when BIO-TEK INDEX Pulse Oximeter Tester exerts interfering signal test. 11.Product size:60mm*34mm*30mm 12.Packing size:55mm*80mm*40mm