Zirconia furnace Zirkonofen Turbo

sinteringheatingfor dental laboratories

With the new Zirkonofen Turbo and its pre-set fast sintering programs for each kind of Zirkonzahn zirconia, it is now possibile to sinter smaller zirconia structures in about 1 hour and 30 minutes. This cuts processing time by 81% and reduces electric consumption by 73%: zirconia structures can be milled, sintered and veneered in 2 hours and 40 minutes only! The sintering platform is controlled by an intelligent electronic system developed in-house. This system monitors the temperature curve of the sintering chamber and controls the platform during the cooling phase. The Zirkonofen Turbo includes a large number of pre-set programs that are perfectly matched to each kind of Zirkonzahn zirconia. This means that the heating, holding and cooling phases vary slightly depending on the material. In addition, the user can create personal sintering programs. With the new Baking Recovery function, unsatisfactory sintering results are nearly impossible! After a power failure, the intelligent software checks whether the sintering program can be regularly completed without compromising the result orr whether the sintering process must be must be suspended. If the sintering program can be continued, the user can see on the screen in which phase of the program the interruption occurred. If the program cannot be completed, the software will inform the user. CAPACITY In the Zirkonofen Turbo, zirconia restorations can be sintered by means of special accessories, like the sintering trays and the ceramic plate. The sintering chamber can contain up to 3 sintering trays stacked on top of each other, which permit sintering up to 120 zirconia elements in one single process.