Fluke detectors

The 875 High Range Containment Monitor consists of a detector, readout, and cable (in metallic tubing) connected through a sealed penetration in the containment wall. The detector walls are thick enough ...

... monitoring system capable of operating over the ranges of 10-2 to 103 mR/h, 10-1 to 104 mR/h, or 100 to 105 mR/h, depending on the detector selected. The system monitors gamma radiation over a 5-decade range and provides ...

... rads if preamplifier is remote or shielded No external power is needed at detector location Three twisted-pair cables with ground conductor and overall shield between detector and ratemeter for maximum ...

... Two end window materials are used for the Model 943 Series Beta detectors. The mylar end window is used for replacement of existing beta detectors with similar windows. The beta detectors ...

... Although all the Model 897A Series GM Detectors are functionally identical, the detectors differ in the tube type employed, sensitivity, and housing. The GM detector has preamplifier ...

... is recommended. Detector efficiency is a function of the sampling geometry and detector used, and ranges from approximately 1 x 103 to 1 x 107 CPM/µCi/cc. Process Radiation Detector ...

... Model 943-27 Current Mode Beta Scintillation Detector with digital preamplifier were developed by Cardinal Health. By using the Model 943-27 Current Mode Detector, in conjunction with a standard pulse ...

... 943-36CS Gamma Scintillation Detector consists of a scintillation crystal, a photomultiplier tube, a preamplifier assembly and an integral check source. Key Features Count range: 107 CPM Preamp integral with detector Integral ...

... current producing detectors and displaying the radiation signal in various engineering units; (CPM, mR/h, or μCi/cc). The Model 942A-200 UDR can be used with all Model 943 Series Beta and Gamma Scintillation Detectors. ...

... verified in conformance with IEEE standard 730 (1984). Digital data acquisition and control system Compatible with all detector/sampler assemblies Meets requirements of NRC Re. Guide 1.75 Process control capability Custom ...